High outside temperatures make cooling systems lose efficiency and reliability. Pre-cooling is a relief for your chiller. It will drastically improve its efficiency, even in extreme heat.
Reduce your carbon footprint and save energy with natural pre-cooling.
PreCooll significantly reduces peak power and unburdens overloaded electricity grids.
Pre-cooling makes the compressors run more efficiently and helps to lower the pressure. This keeps the cooling capacity high, even in warm weather.
PreCooll contributes to a comfortable living environment in urban areas, without heat islands. Your cooling will be energy efficient and resistant to high temperatures.
Up to
energy savings
Up to
more cooling capacity
Up to
peak power reduction
Up to
pre-cooling
In hot conditions, most cooling systems have insufficient cooling power. Energy is lost and effective cooling becomes impossible. The consequences are enormous and range from uncomfortable working conditions to food loss by failure of your cooling system. Patented PreCooll Oxyvap® panels create a cool microclimate around your cooling system. Evaporative cooling lowers the incoming air temperature by as much as 25°C. PreCooll significantly increases the cooling capacity, so deep cooling is possible even on the hottest days.
We pre-calculated that we would recoup the investment within 5 years, but I think it will be achieved within 3 years. I have recommended many colleagues to add this system to their cooling installation because I foresee more hot summers to come.
We pre-calculated that we would recoup the investment within 5 years, but I think it will be achieved within 3 years. I have recommended many colleagues to add this system to their cooling installation because I foresee more hot summers to come.
PreCooll's smart AquaMizer pump station is critical to its excellent performance. State-of-the-art sensors and control algorithms closely monitor environmental conditions. This allows maximum water efficiency and makes sure PreCooll is only active when necessary. The fully automated water management system continuously monitors the water quality. It controls drainage and refreshes water when the mineral content reaches certain values.
savings on your energy bill.
PreCooll effectively upgrades your traditional cooling system and provides longer life and lower maintenance costs. The small investment ensures great energy savings.
Complies with all regulations.
Small |
Medium |
Large |
|
Nominal power |
87 watt |
152 watt |
232 watt |
Nominal water flow |
32 Lpm @ 2.0 m head (9 gpm @ 79 inAq) |
55 Lpm @ 2.0 m head (15 gpm @ 79 inAq) |
80 Lpm @ 2.0 m head (21 gpm @ 79 inAq) |
Nominal volume |
30 L. |
75 L. (20 gal) |
130 L. (34 gal) |
Nominal wall length |
4 m @ 2.0 m head (158 in @ 79 inAq) |
7 m @ 2.0 m head (276 in @ 79 inAq) |
10 m @ 2.0 m head (394 in @ 79 inAq) |
Dimensions |
800 mm x 395 mm x 405 mm (31.5 in x 15.6 in x 15.9 in) |
1000 mm x 595 mm x 486 mm (39.4 in x 23.5 in x 19.1 in) |
1200 mm x 795 mm x 544 mm (47.2 in x 31.3 in x 21.4 in) |
Minimum collector height |
160 mm (6.3 in) |
195 mm |
210 mm |
Weight (dry/wet) |
15 kg / 45 kg (33 lb / 99 lb) |
20 kg / 95 kg (44 lb / 209 lb) |
25 kg / 155 kg (55 lb / 347 lb) |
Get in touch with Oxycom and see what PreCooll can do for your business.
We will reply you shortly.
New Why ventilation and humidity are important against spread of coronavirus
Read the article now